This machine is mainly use pasteurized, applicable to beer, tomato sauce and other products of sterilization and cooling, can also be used as a separate cooling equipment. The machine adopts hot water circulating spray sterilization, warm water pre-cooling, cold water cooling and other sections of handling, sterilization temperature and time arbitrary adjustable, high degree of automation. The machine is consisted of conveyor belt, mesh belt system operation, frame, spray system, water pump, water tank, steam heating automatic control system,the main transmission mechanism and electric cabinet.
The finished cans transported to the sterilization area for canned spray sterilization. Sterilization using steam heating hot water spray sterilization, the maximum temperature of up to 98 ℃, sterilization temperature can be arbitrarily set by the temperature control device, as long as set a set of upper and lower limit values at the parameter setting page, then machine can be full automatic control. The heated high-temperature water from the top of the sterilizer spray pipe spray nozzles, spray nozzles to spray high-temperature water spray. After the completion of sterilization cans enter into the pre-cooling zone, after pre-cooling and then into the cooling zone. After cooling the cans is generally maintained at 32 ~ 35 ℃, which can avoid the precipitation of condensate, without affecting the quality of the tank liquid.
Sterilization machine adopted the 5997 type plastic, working with the SEW 0.55kw reducer, motor speed frequency control, Machine main structure is made of stainless steel rectangular tube, Main cover adopted the 1Cr18Ni9Ti steel board. Main machine is fully water seal structure. Electric and pneumatic parts are from Schneider,Festo and other well-known brands in the world.
2）Speed: 150 cans per mins
4）Sterilization can height: ≤200mm。Max height: ≤250mm
6）Control voltage: DC 24V
7）Working pressure: 380V
8）Water pressure: 2～4kgf/cm2
9）Steam Pressure: 4～6kgf/cm2
10) Compressed air pressure: 2～4kgf/cm2